 |
Repair glue stick -110G TX-14 cable - Thai LGB |
编号：
品牌：光本牌 [查询该品牌全部商品]
单位：
重量： 克
材质：
品质：
产地：
规格：
|
Repair glue stick -110G TX-14 cable - Thai LGB
The bar structure for bicomponent core inside and outside muddy, hand kneading of several mixing can be pasted to clean up clean, leak, summer 30 minutes curing as hard as iron and steel, after curing can be cutting, polishing, painting, the remaining part can save for a long time. As with pressure metal pipe container and light is matched with the pressure disk with the 3#, put the bar kneading homogeneously into flake, put pressure on the sheet with the pressure according to the leak immediately to stop the leak 3#. After the end of the leakage of the M tape wrapped around the strength of higher life expectancy longer.
This product contains composite polymer nano strong factor alloy powder, imported raw materials, high hardness, high strength, strong adhesion.
Temperature: after curing, -38~190
Specifications: diameter of 20mm * 180mm
Curing hardness: 75-85D
Tensile strength: 6-6.9MPa
Cure time: 25 19-30 minutes
Construction area: /110g 3cm
Shi blocking medium: all kinds of water, all kinds of oil, gas, steam, all kinds of chemicals (strong corrosive media, please first test)
Suitable material: metal, nonferrous metals, cement concrete, PVC, PE, PR and other kinds of plastic, glass, steel, etc.
Note: please stop the operation when used alone, with water pressure operation together with 3# disk
instructions：
Before use, to be repaired is around the rust, dust and other attachments to clean grease. Remove the plastic pipe in the glue stick, cut the need for the amount of glue stick with the core of the two kinds of color full soft evenly (about 50 times) until the heating becomes soft. At this time press or smear in the repair parts (to prevent becoming hard as soon as possible), waiting for 10 minutes or so cure can be as hard as iron and steel, and finally can be used to light the M tape winding can prevent the two leakage. When the metal pipe or container leakage can not stop water supply pressure can only bring pressure seal, the light 3# pressure disk placed on the outside of the clay, together with the press in leakage (do not press hard on the site, so as not to clay to the surrounding extrusion, on their own strength to rely on magnetic adsorption pressure.)
Features: the curing before daub form to use when not dripping, flowing, very convenient to use. In the cold area in winter, it should be heated to room temperature or slightly above room temperature, and it can effectively accelerate the curing speed.
Matters needing attention:
Plugging after curing bulk life: No 10 years of weathering carbonation without cracking;
This product has no pollution, no radiation, green environmental protection;
After use must be within 5 minutes after mixing or kneading, hardening scrap
Stick to the body or hands and feet washing powder washing powder can be washed several times;
When used to store the remainder in cutting tubing used repeatedly;
Storage period: 2 years, stored in shading and ventilation
Repair glue stick -110G TX-14 cable - Thai LGB
The bar structure for bicomponent core inside and outside muddy, hand kneading of several mixing can be pasted to clean up clean, leak, summer 30 minutes curing as hard as iron and steel, after curing can be cutting, polishing, painting, the remaining part can save for a long time. As with pressure metal pipe container and light is matched with the pressure disk with the 3#, put the bar kneading homogeneously into flake, put pressure on the sheet with the pressure according to the leak immediately to stop the leak 3#. After the end of the leakage of the M tape wrapped around the strength of higher life expectancy longer.
上一篇：橡胶粘接剂-冷-热 ：光本牌G. BY600 700 800 900
下一篇：光本GBD805系列-盾构隧道管片液态铁堵膏
